Installation procedure: the 7 steps
Setting up a DSA treatment concept yourself

Put the dentist's chair in its place.

Screw the chair adaptor to the chair

with three bolts.

Put the surface mounting bar into the

adaptor and screw down the nut.

Place the surgical lamp in the surface

mounting bar and connect the power

cord.

Put the devices plug that comes out

of the chair into the chair adaptor.

Put the plug of the chair into the wall

socket.

Put the plug of the DSA 2000L and

the suction unit in the sockets that

are mounted in the bottom of th

chair adaptor.
 

You can set to work
Please always read the supplied manual.
.

Installation procedure: 3500TT

Put the mounting plate in its place

Screw the 3500TT down on the
mounting plate

Put the dentist's chair on the

mounting plate

Put the light post on the 3500TT

Place the surgical lamp in the
light post

Put the plug of the chair into the

wall socket at the 3500TT

Connect the 3500TT to voltage

or a wall socket

The mobile suction unit may be connected in the wall socket at the bottom of the 3500TT. It is customary that the suction unit comes from behind the patient, for example at 12 o'clock from the instruments cabinet and is connected to the wall socket there.